MARS COMMERCE ZEUS4-MC Lite - CHECKING THE INPUT STATUS; CHECKING INPUT STATUS BY SMS COMMAND

ZEUS4-MC Lite
INSTALLATION MANUAL
37
14 CHECKING THE INPUT STATUS
User can check input status with the use of SMS command
14.1 CHECKING INPUT STATUS BY SMS COMMAND
By sending this command to ZEUS4-MC LITE you receive SMS message with all Input status:
;INS;
Return SMS message is:
 ;INS(1-4)=(OPEN-ON) – alarm loop is open and the input is in alarm state
 ;INS(1-4)=(OPEN-OFF) – alarm loop is open and the alarm input is in idle state
 ;INS(1-4)=(LOW-ON) – alarm loop is close on GND and the input is in alarm state
 ;INS(1-4)=(LOW-OFF) – alarm loop is close on the GND and the alarm input is in idle state
 ;INS(1-4)=(HGH-ON) – alarm loop is close on +12MCC and the input is in alarm state
 ;INS(1-4)=(HIGH-OFF) – alarm loop is close on +12V and the alarm input is in idle state