Marsh-McBirney Flo-Mate 2000 - Specifications; Velocity Measurement; Power Requirements; Electronic Case

Outputs
Display
3
1
¦2 Digit
Signal Output Connector (Optional)
Analog 0.1 V = 1 ft/sec or 1 m/sec
2 V = Full Scale
Materials
Sensor
Polyurethane
Cable
Polyurethane jacket
Electronic Case
High Impact Molded Plastic
Weight
3 lb 9 oz with case and 20 ft of cable
2 lb 10 oz without sensor and cable
Temperature
Open-Channel-Velocity Sensor
32° F to 160° F (0° C to 72° C)
Full-Pipe Sensor (S/S Insertion Tube)
32° F to 160° F (0° C to 72° C) @ 250 psi
Electronics
32° F to 122° F (0° C to 50° C)
SPECIFICATIONS
Velocity Measurement
Method
Electromagnetic
Zero Stability
± 0.05 ft/sec
Accuracy
± 2% of reading + zero stability
Range
-0.5 to +19.99 ft/sec
-0.15 m/sec to +6 m/sec
Power Requirements
Batteries
Two D Cells
Battery Life Continuous ON hours
Alkaline 25-30
NiCad 10-15 per charge
External Power Supply (Optional)
120 V, 1 W or 220 V, 1 W
Water Resistant Electronic Case
Submersible
One Foot for 30 Seconds
iii