19
Operating Multiple Cameras Using RS-422/485
• Using RS-422 (VISCA), you can connect up to 7 cameras.
• Using RS-485 (PELCO), you can connect up to 255 cameras.
• Using RS-485 (PELCO), all camera addresses must be set up before the connection. You can
set the camera address by operating OSD menu.
• In this case, you can use multiple control keyboards. Only one keyboard that the camera can
response to at one time.
• The joystick of the remote keyboard controller allows comfortable pan/tilt and zoom operations.
System Configuration C (Operating Multiple Cameras)
• You can use the RS-232 connections when using the RS-422/485 connection.
• Only one camera at a time can be displayed on the computer.
• The specified frame rate may change when communicating via a USB3.0 hub
Notes
To Next Page
Loading...
