Dimensions
All measurements are given in millimeters
This minimum center-to-center
distance can be reduced if pan limits
are set via the control menus
551
472
566
335
748
650
731
255
© 2012 Martin Professional A/S. Information subject to change without notice. Martin Professional A/S and all affiliated companies
disclaim liability for any injury, damage, direct or indirect loss, consequential or economic loss or any other loss occasioned by the
use of, inability to use or reliance on the information contained in this document. The Martin logo, the Martin name and all other trade-
marks in this document pertaining to services or products by Martin Professional A/S or its affiliates and subsidiaries are trademarks
owned or licensed by Martin Professional A/S or its affiliates or subsidiaries.
P/N 35000258, Rev. E
To Next Page
Loading...
Need help?
General
