Masimo EMMA - Page 39

www.masimo.com 37 Masimo
Alarm
at t = 0
Alarm Priority: Low
at t = 20
Alarm Priority: Low
t = 40, 60, 80, ...
Alarm Priority: Medium
No Adapter
1
(((•)))
n/a n/a
Zero point adjustment
1
(((•)))
n/a n/a
1
See Chapter 6: Troubleshooting on page 39.
Note: t = 0 is defined as the time when the alarm condition first is indicated. t = 40, 60, 80, ... shall be interpreted as
"40 sec later than t = 0", "60 sec later than t = 0", "80 sec later than t = 0" etc.