Replacing the Power Fuse
Capacitance Measurement
The Meter is capable of measuring up to 220mF
To perform a capacitance measurement:
1. Turn rotary switch to position
，
LCD panel display‘F’;
2. Connect red test lead with VΩHz terminal and black test lead with COM terminal;
3. Connect test leads to measure capacitance;
4. The function and measurement are displayed
Notes: 1). Discharge the capacitance before
measuring.
2). Do not to perform capacitance measurement on a
circuit board on which there are other parallel
devices, for that may cause a very large error.
To Next Page
Loading...
