Mastech MS8040 - Resistance Accuracy; Capacitance Accuracy

Replacing the Power Fuse
Chapter 4 Specification
General Specification

22000 counts
，
autorange / manual range, measurement rates of 2, 20 timers/second
（
slow, fast
）
.

The max overload protective voltage is up to AC 250 V (TRMS)except for current and voltage.
In μA/mA mode, protective current is 0.3A; In A mode, protective current is 10A.

Overload Indicator: OL.

Fuse : 0.3A/250V(μA/mA terminal), 10A/250V(A terminal), 0.1A/250V(line power fuse)

Optical Isolution RS232C Interface.

Operating Temperature: 18℃
～
28℃(relative humidity <=80%)

Storage Temperature:
－
20℃
～
60℃(relative humidity <=80%)

Temperature Coefficient: 0.05×Specified Accuracy per ℃ (<18℃ or >28℃)

Dimensions: 238mm(W)×230mm(L)×83mm(H)

Weight : Approx. 1.5kg, without power cord
Range and Accuracy
The below-listed accuracies under different ranges refer to those which are guaranteed by the meter within one-year
calibration, under the operating temperature of 18℃-28℃ and relative humidity less than 80%.The presentation for accuracy
is: ± (a% reading digits + b digits)
28