DISPLAY
EN / SunMaster CS15TL/CS20TL / August 2010 19
8.5 PLANT TOTALS*
In figure 27 and 28 the four Plant Totals screens are
shown. Use the display buttons left and right to scroll
between the screens.
Actual (figure 26, 1
st
) = actual total plant power kW,
2
nd
: P/Pwp = normalised power in %. The inverter Watt
Peak value together with the inverter name (Ref.) are
adjustable in Device Info (section 8.10.4). Adjust this value
to let the inverter calculate the normalised power.
3
rd
: Day = total plant energy of the present day kWh.
4
th
: Inv = inverter number corresponding with inverter
number in the other Plant Totals screens;
Ref = Inverter reference to be entered by yourself;
Serial = Inverter serial number;
Info = Inverter information.
Figure 27: Plant totals screens 1&2
*
A software update may be necessary to activate this feature.
Contact Mastervolt for more information.
Figure 28: Plant totals screens 3&4
8.6 MULTIMETER
Use this screen to measure the actual DC and AC values.
See figure 29. The power, voltage and current of Input 1
and 2 are shown. The output AC frequency is also
indicated.
Figure 29: Multimeter inputs/output
To Next Page
Loading...
Need help?
General
