Matrix SPARSH VP210 User Manual

113 Matrix SPARSH VP210 User Guide
Walk In
Every extension of the System is assigned a Class of Service for feature access and Toll Control defining its calling
permission.
Using Walk-In feature you can,
• access the features allowed to your phone in the Class of Service (CoS) from any other extension.
and
• make calls as per the Toll Control level assigned to your phone from any other extension.
Walk-In Class of Service is a password-protected facility. However, the default User Password 1111 will not be
accepted. To be able to use this feature, you must first change the default User Password. For instructions, see
“Change User Password” .
To be able to Walk-In into your extension,
• Press Menu Key.
• Scroll using the Up/Down Navigation Key to select Walk-In.
• Press Select Key.
• Enter the Extension Number.
• Scroll using the Up/Down Navigation Key and enter the Password.
• Press OK Key.
• The set indication appears on the Home Screen.
Walk-Out of an Extension
• If your Walk Out mode is set as One Call by the System Administrator, you will be walked out
automatically after a call.
• If your Walk Out mode is set as Multiple Calls, you must walk out. To do so.
• Press Menu Key.
• Scroll using the Up/Down Navigation Key to select Walk-In.
• Press Cancel Key. The set indication disappears from the Home Screen.

Matrix SPARSH VP210 Specifications

General

Brand	Matrix
Model	SPARSH VP210
Category	IP Phone
Language	English