Matrix SPARSH VP210 User Manual

25 Matrix SPARSH VP210 User Guide
For the following types of Incoming calls, ringtone will always be played even if you have set the Ringer
Mode as Ring Off.
• Emergency Reporting call
• Alarm call
• Reminder call
Ringer Delay Timer
You can also configure the Time Delay for the ringtone to be played.
• Scroll using the Up/Down Navigation Key to Ringer Delay Timer option and press Select Key.
• Enter the desired time in second after which you want the ringtone to be played.
• Press Save Key.
Ringer Acknowledge Timer
• Scroll using the Up/Down Navigation Key to Ringer Acknowledge Timer option and press Select Key.
• Enter the desired time in second after which the incoming Ringer Tone will not be played.
To disable the timer, set the time as 00. Set the timer to the desired value (01 to 99 seconds) to enable.
• Press Save Key.
If you set this timer as 00 , the Ringer Auto Acknowledgment is disabled and you must acknowledge the
incoming call ring manually by answering the call. If you do not acknowledge, the ring will be played till you
answer/reject the call.

Matrix SPARSH VP210 Specifications

General

Brand	Matrix
Model	SPARSH VP210
Category	IP Phone
Language	English