27
CHAPTER 7: SERVICE MODE
1) To enter Service Mode, press "ENTER, 3, 0, 0, 1, ENTER" on the number keypad ON THE CONSOLE and Service Mode will appear on the display.
2) Service Mode is divided into 4 tabs. They are Setup, Test, Log, and Date & Time.
3) Choose a tab by touching the button next to the desired tab.
4) Each of the tabs have options that will appear once you have chosen that particular tab.
5) Press the button next to "HOME" or the EMERGENCY STOP to exit Service Mode..
7.1 USING SERVICE MODE
To Next Page
Loading...
