Matrox MURAIPXI-E4JHF - Mura MPX Series; C900 or C680

16 Matrox Display Wall – User Guide
 Mura IPX Series capture cards – see page 44.
3 Install the driver for your third-party hardware. For more information, see the
documentation for your graphics hardware.
4 Install the Matrox software for your Mura IPX Series capture cards – see page 50.
5 Set up your multi-display layout. For more information, see the documentation for your
graphics hardware.
6 Configure your display wall. You can use the following:
 Matrox Network API – see page 52.
 MuraControl for Windows – see page 54.
Mura MPX Series
1 Install your Matrox cards – see page 22.
2 Connect your cards – see page 35.
3 Install your Matrox software – see page 50.
4 Configure your display wall. You can use the following:
 Matrox Network API – see page 52.
 Matrox PowerDesk – see page 52.
 MuraControl for Windows – see page 54.
C900 or C680
1 Install your Matrox cards – see page 22.
2 Connect your cards – see page 44.
3 Install your Matrox software – see page 50.
4 Configure your display wall. You can use the following:
 Matrox Network API – see page 52.
 Matrox PowerDesk – see page 52.
 MuraControl for Windows – see page 54.