Matrox Display Wall – User Guide 75
Description of supported connections
Matrox M9120 and M9125 PCIe ×16
Connection overview
Description of supported connections
Device connector Description
HD-15 If your monitor uses an HD-15 connector, connect it directly to your
quad-monitor cable.
DVI If your monitor uses a DVI connector and supports analog input, you
need an HD15-to-DVI adapter (sold separately). Some monitors with
DVI connectors support both digital and analog input. If you’re using
one of these monitors with your Matrox product, make sure it’s
configured to use analog input. For more information, see your
monitor documentation.
Device connector Description
DVI If your monitor has a DVI connector, connect your monitor cable
directly to a DVI connector on your Matrox card.
HD-15 If your monitor has an HD-15 connector, use a DVI to HD-15 adapter
included with your Mura product to connect your monitor cable to
your Matrox card.
Monitor
connector
(HD-15)
Monitor
connector
(DVI)
DVI to HD-15
adapter
To Next Page
Loading...
