78 Matrox Display Wall – User Guide
Description of cables
Description of supported connections
Matrox M9128 LP PCIe ×16
Connection overview
Cable Description
Output M9140 cards use KX20 to quad-DVI cables
to connect up to four (4) monitors per card.
Monitors are numbered consecutively
based on which connector each is attached
to, starting with connector labeled 1.
Device
connector Description
DVI If your monitor has a DVI connector, connect your monitor cable directly to
a DVI connector on your output cable.
HD-15 If your monitor has an HD-15 connector, use a DVI to HD-15 adapter
included with your Mura product to connect your monitor cable to your
output cable.
WA R N I NG :
To avoid damaging the
DisplayPort connector on your DisplayPort
monitor cable or on your graphics
hardware, carefully remove the DisplayPort
cable by pressing the latch on the top of the
DisplayPort connector while removing the
connector.
Monitor connector
(DisplayPort
To Next Page