44 Matrox Display Wall – User Guide
Connecting your C-Series card
This section describes how to connect your Matrox C-Series card.
Once all your cards are connected, restart your system and install your Matrox software (see
“Installing your software”, page 50).
Supported hardware More information
Input Mura IPX Series (capture cards) See page 32.
Output
C900 See page 45.
C680 See page 46.
Console
M9120 PCIe ×16, M9125 PCIe ×16 See page 75.
M9120 Plus LP PCIe ×1 / ×16 See page 76.
M9140 LP PCIe ×16 See page 77.
M9128 LP PCIe ×16 See page 78.
M9138 LP PCIe ×16, M9148 LP PCIe ×16 See page 79.
Note
: To make sure your cables are securely attached to your Matrox cards, use a cable retention
bracket. To purchase a cable retention bracket, contact your Matrox representative. For more
information, see “Appendix C – Matrox secure cable solution”, page 81.
To Next Page
Loading...
