Matrox QuadHead2Go Series - Connecting Your QuadHead2 Go Q155 Unit; Connection Overview and Setup

Matrox QuadHead2Go Series – User Guide 22
Connecting your QuadHead2Go Q155
unit
This section describes how to connect your Matrox QuadHead2Go Q155 unit.
Before you begin
To avoid possible problems that could damage your monitors or prevent you from using your Matrox
product, read the following guidelines before connecting your devices.
 Whenever you change your connection setup, make sure you’re using the correct
connectors and that all connectors are properly fastened.
 Review the safety information provided. For more information, see “Matrox safety
information”, page 5.
Connection overview
QuadHead2Go Q155 – Back
HDMI OUT
12
4
3
HDMI IN
1234
HDMI IN
(Audio/video
source)
HDMI OUT
(Monitors)
LAN
(Network)
12V DC power