27 Matrox QuadHead2Go Series – User Guide
Updating your Matrox QuadHead2Go
firmware
The Matrox QuadHead2Go Firmware Updater enables you to update the firmware and install the
default layouts of your Matrox QuadHead2Go products.
Supported operating systems
The Matrox QuadHead2Go Firmware Updater supports the following operating systems:
Windows® Server® 2019
Windows® Server® 2016
Windows® 10 (64-bit)
Linux (tested with Ubuntu 14.04 and Mono 5.12)
Obtaining the Matrox QuadHead2Go firmware updater
package
Matrox makes the latest firmware and updater package for your QuadHead2Go products
available on the Matrox web site (
www.matrox.com/QuadHead2Go/support
).
Download the latest firmware package and extract the files to a local folder on your
system (for example,
C:\QuadHead2GoFirmwareUpdate
).
Before you update your firmware
Before you update the firmware on your QuadHead2Go devices, read the following guidelines:
Make sure you have at least 1 GB of free disk space available.
To avoid possible problems with your QuadHead2Go devices, we recommend running
only one instance of the QuadHead2Go firmware updater on your network at a time.
Note:
Your Matrox QuadHead2Go product may ship with an older firmware version.
Before using your QuadHead2Go product, you must update the firmware version installed
on your devices to use the version of your deployed release.
To Next Page
Loading...
