Matrox QuadHead2Go Series User Manual

8 Matrox QuadHead2Go Series – User Guide
 Matrox angled brackets
To purchase optional hardware, contact your Matrox representative.
Installation overview
To install your Matrox product:
1 Install your QuadHead2Go card – see “Installing your QuadHead2Go card”, page 10.
2 Connect your product –
 See “Connecting your QuadHead2Go Q185 card” on page 12.
 See “Connecting your QuadHead2Go Q155 card” on page 15.
 See “Connecting your QuadHead2Go Q185 unit” on page 18.
 See “Connecting your QuadHead2Go Q155 unit” on page 22.
3 Validate your setup – see “Validating your QuadHead2Go setup”, page 25.
4 Install the software – see “Matrox PowerWall software”, page 30. For more information
on PowerWall software, see the help file included with your PowerWall software.
More information
Your Matrox user guide provides information on installing and connecting your Matrox hardware.
For information on other Matrox software features and options, see the documentation for that
software.
For information on how to use and configure Matrox PowerWall software, see the PowerWall help file.
Be sure to check for any last-minute release notes included with your product. Also, check the Matrox
web site (www.matrox.com/graphics
) for the latest Matrox software, technical support, and product
information.

Matrox QuadHead2Go Series Specifications

General

Brand	Matrox
Model	QuadHead2Go Series
Category	Controller
Language	English