Readout the actual position of the device:
Select the device by writing "LD x DV". (x = 0 => Antenna Mast and x = 1 => Turntable)
Write "CP" (set the Pointer to the CP-Register)
Readout of six Bytes (applies to antenna mast and turntable)
For polarization readout select the antenna mast
Write "P?" and readout the position
In general all registers can be readout in the same way.
E.g.: WL and the CL Register
Device address Device
0 Antenna Mast 1
1 Turntable 1 (TT)
2 Cable Guide Rail (CGR) or Field Probe Positioner (FPP)
3 Turn Device (TD)
4 (Compact) Antenna Mast 2 or Antenna Stand
5 Turntable 2 (TT)
30
To Next Page
Loading...
Need help?
General