4.8 Error Diagnostics
If an error occurs, the diagnostics button in main screen of the device changes to red.
To reset the error, press the diagnostics button first.
The error can be reset by pressing the button in the down left corner.
If an error appears regularly or always, you can get additional information to the error by
pressing “NC1” – “NC4” Buttons. Each single motor of the device has its own NC menu.
The screen below appears and provides more detailed information. This can be important for
maturo to give a quick solution to your problem.
If you need support, please always note the serial number of your device and the error
texts before contacting maturo.
14
To Next Page
Loading...
Need help?
General