Need help?Do you have a question about the maturo NCD and is the answer not in the manual?
General| Brand | maturo |
|---|---|
| Model | NCD |
| Category | Controller |
| Language | English |
Covers electrical installation, qualified personnel, service, and safe operation practices.
Details on fibre optic cable connection, power supply requirements, and power-on procedure.
Procedure for powering up the controller and connected devices.
Identifies keys and ports on the controller's front panel.
Explains how to select devices and the screen shown after boot.
Guide to activating and deactivating positioners using dedicated keys.
Steps for referencing antenna masts and specific device types like TAM/BAM.
How to move positioners using JOG keys and set incremental distances.
Understanding actual vs. target positions and how to set them.
Methods for entering numerical data via touch panel or keypad.
Configuring speed, acceleration, deceleration, and tilt functions.
How to identify, diagnose, and reset errors using the device interface.
Configuration for communication interfaces and system menu access.
Using the logger for analysis and setting remote communication addresses.
Procedures for updating controller software via USB and saving/restoring configurations.
Guide to cleaning fibre optic cables and connectors to resolve connectivity problems.
Outlines the product warranty terms, coverage, and exclusions.
States that the product complies with relevant European directives and standards.
Details on specific commands for controlling antenna masts and stands.
Details on specific commands for controlling turntables and turn devices.
List and explanation of error codes displayed by the controller.
Instructions on addressing devices, setting speed, and moving to positions via commands.
To Next Page