Brief description of NCD
The multiple control device NCD works with KeySight (former Agilent), R&S, Teseq and other
software. The IEEE 488 (GPIB) is available as a standard interface device. Other interfaces
available upon request.
Highlights:
- User-friendly, time-saving function keys optionally available
The function keys F1 to F10 allows the implementation of individual, customer-
specific sequence programs for user-friendly, times-saving handling and operation.
The individual programs can be stored and accessed by one function key.
- Error analysis based on error codes
Diagnosis via USB interface possible
Optional analysis via internet and Ethernet interface possible
- USB interface
Updates easily implemented by USB stick
Possibility to plug in a computer mouse and keyboard
- Easy operation with touch panel
Fast and reliable operability based on touch panel technology
Layout of touch screen display can easily be adjusted according to customers’
request
- Position keys
With the position keys JOG+/JOG- the Positioners can easily be moved in manual
mode.
- Real-time capable
Each program cycle will finished in the default time frame be no matter how many
devices are controlled at the same time. Due to this feature no overflow of commands
can happen when using fast remote computers.
- Handheld control unit
Easy implementation of standard or customer-specific handheld control units possible
- Precise Display Accuracy
The display resolution is highly precise with position readout increments of 1 mm
respectively 0.1 degree.
Higher resolutions possible upon request.
- Many additional options possible
Emergency stop buttons, handheld control units (HCU), luminaire, analogue outputs
and much more additional features upon request
5
To Next Page
Loading...
Need help?
General