Page 10 P/N 03521015 Rev K
Refer to the regulatory approval inserts and the following NIOSH website addresses for MAXAIR CAPR regulatory approval
status.
http://www2a.cdc.gov/drds/cel/cel_results.asp?startrecord=1&Search=cel_form&maxrecords=50&manufacturer=BMD&appdatefrom=&appdate
to=&powered=&scbatype=&scbause=&privatelabel=
http://www.cdc.gov/niosh/npptl/topics/respirators/disp_part/PAPRtables.html
The following table summarizes current components that may be used to congure systems relative to the applicable Approval
Body.
ITEM
NUMBER
DESCRIPTION
FILTER CARTRIDGE NIOSH CE
2164-10 2165-10 2163-10 XP
2071-01 Liner (included with 2070-03)
2070-03 CAPR Helmet
2061-03 Filter Cover Cap (FCC)
2075-03 CAPR Helmet with Filter Frame (Cage)
2076-03 CAPR Helmet with Filter Frame and ChinBar
2365-02ML DLC Lens-Cuff, Medium-Large
2365-02SM DLC Lens-Cuff, Small
2367-02 Quick Cuff
2260-05ML DLC Shroud, Medium-Large
2260-05SM DLC Shroud, Small
2261-01ML DLC Double Shroud, Medium-Large
2261-01SM DLC Double Shroud, Small
2270-01ML DLC HE Hood, Medium-Large
2270-01SM DLC HE Hood, Small
2270-03ML DLC XP Hood, Medium-Large
2270-03SM DLC XP Hood, Small
2270-04ML DLC HE Hood, Medium-Large
2270-04SM DLC HE Hood, Small-Medium
2270-06ML HE Hood, Medium-Large
2270-06SM HE Hood, Small-Medium
2500-30TSC Li-Ion Battery, Large
2500-36TSC Li-Ion Battery, Small
2000-76 Battery Belt
2600-01 Li-Ion Battery Charger
Use of Gang Charger and Bracket do not require NIOSH approval or CE Marking
2601-06 6-Gang Charger, w/6 2600-01 Chargers
2601-06B 6-Gang Charger Bracket, for 2600-01 Chargers
NOTE: *The CE Marking afxed to the devices, indicates compliance with the following European Community Directives:
●Directive 89/686/EEC – Personal Protective Equipment (PPE)
●Directive 93/42/EEC – Medical Device
This PPE has been EC-type examined by the following notied body:
INSPEC International Ltd
56 Leslie Hough Way
Salford
Great Manchester
M6 6AJ
Number 0194
2.2 Approved System Congurations
To Next Page
Loading...