EasyManua.ls Logo

Max-Air Systems CAPR - Product Specifications

Default Icon
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 96 P/N 03521015 Rev K
27. Specication
Specications listed are approximate and may vary slightly from unit to unit or by power supply uctuations and/or tolerance of
the controller.
710-DLC CAPR SYSTEM
# PROPERTY SPECIFICATIONS (CE) SPECIFICATIONS (NIOSH)
1 Complete Device Classication PAPR, Loose Fitting PAPR, Loose Fitting
2 89/686/EEC Complete Device Category III N/A
3 93/42/EEC Complete Device Class I N/A
4
EMC Classication (IEC 60601-1-2:
2007; EN 60601-1-2:2007)
Class A for Emissions; Immunity for
Not Life-Supporting Equipment
N/A
5 Storage Temperature Range -20 to 40°C -
6 Storage Maximum Humidity 80% RH -
7
Effective eld of vision versus natural
eld of vision
97% N/A
8
Overlapped Field of vision versus
natural eld of vision
99% N/A
9 Maximum Inward Leakage 2% @ Minimum Airow 175 LPM N/A
10 Fit Factor N/A Minimum 500
11
Maximum allowable Percent Leakage:
Dioctyle-Phthalate Test
N/A 0.03% @ 107 LPM
12 Minimum allowable NaCl efciency N/A 99.97% @ 125 lpm
13 Maximum Breathing Resistance 5 mbar N/A
14 Minimum Airow 175 LPM 170 LPM
15 Battery Lithium-Ion -
16 Noise Level 75 dBA limit 80 dBA limit
17 Total Mass/ Total Mass on Head 1.25 kg/ 0.75Kg -
18 2164-10 Filter Classication TH2 P R S HE*
“-“=Equivalent
“*”= NIOSH approved HE protection lters can be used for protection against particulate aerosols containing oil. However, for
reliable operation and desirable useful run time, Bio-Medical Devices Intl does not recommend Filter Cartridge use against
particulate aerosols containing oil.
2500-30TSC/ 2500-36TSC Battery Specication
IPXO Ordinary Equipment
Duty Cycle: Continuous Operation.
# PROPERTY SPECIFICATIONS
1 Minimum Continuous Operating Time: 2500-36TSC 4 Hrs. (Typical 8-10 hr./Charge)
2 Minimum Continuous Operating Time: 2500-30TSC 8 Hrs. (Typical 16-20 hr./ Charge)
3 Charge Input 16.8V; 1A
4 Electrical Output: 2500-36TSC 14.8V; 2.2Ah
5 Electrical Output: 2500-30TSC 14.8V; 4.4Ah
2600-01 Charger Specication
# PROPERTY SPECIFICATIONS
1 Complete Charge for 2500-36TSC or 2500-30TSC 4-6 Hours for a Fully Drained Battery
2 Electrical Output Up to 16.8V; Up to 0.9A
3 Electrical Input 100-240 VAC; 50-60Hz; 0.3A

Table of Contents