Max-Air Systems CAPR - 14 Instruction for Use: Disposable Lens Cuff (DLC)

P/N 03521015 Rev K Page 51
WARNING
Use only if package is received unopened and contents
are undamaged. If damage is noted, contact the shipper for
replacement or repair.
Prior to using any MAXAIR
®
System or component, be sure
to be familiar with the system’s NIOSH approved congura-
tion.
Read and understand the User’s Instructions Manual.
Failure to follow the User’s Instructions Manual may be
hazardous to the user’s health.
The institution using this product in any application is
responsible for determining the appropriateness of this
equipment relative to regulatory requirements. Bio-Med-
ical Devices Intl, Inc. does not recommend the appropriate
systems for a particular institution or facility.
DO NOT use if any component is damaged. If any com-
ponents are damaged or contaminated and therefore unt
for safe and effective use, they should be replaced imme-
diately.
Use only MAXAIR Systems/ NIOSH approved compatible
components.
The DLCs are not intended for use against oily particulates
such as paint mist, oil mist or detergents.
NOT for use in atmospheres immediately dangerous to life
or health (IDLH), and atmospheres containing less than
19.5% oxygen.
Follow current local regulations governing biohazard waste
to safely dispose of used shrouds.
If you need more information, contact your BMDI Sales
Representative, or call BMDI customer service at
1-800-443-3842.
14. Instruction For Use: Disposable Lens Cuff (DLC)
Intended Use
The MAXAIR
®
CAPR
®
DLC (Disposable Lens Cuff) Systems
are intended to lter aerosolized and droplet particulates.
DLCs are designed for single use applications.
For Use With
The MAXAIR 2365-02 DLC is a component of the
MAXAIR CAPR DLC Systems and is intended to be donned
with a MAXAIR CAPR Powered Air Purifying Respirator (PAPR)
2070-03 Helmet and a 2164-10 Filter Cartridge.
Standard CAPR 2365-02 DLC System
1. 2070-01 Liner (included
with 2070-03 Helmet)
5. 2500-36TSC Battery, Small
2. 2070-03 Helmet and
Power Cord
6. 2600-01 Battery Charger
3. 2164-10 Filter Cartridge 7. 2000-76 Battery Belt
4. 2061-03 Filter Cover
Cap
8. 2365-02 DLC
Materials
DLC Lens is PETG
DLC Cuff is Polyurethane
Specications
Temperature Limits: 490C
Efciency Rating: HE
Regulatory
CE Mark
NIOSH
1 5
6
8
4
32
7
O.N. 2365-02SM
Small-Medium
PN 01031316
O.N. 2365-02ML
Medium-Large
PN 01031291