Max-Air Systems CAPR - 20 Instructions for Use: 2367-02 Quick Cuff

P/N 03521015 Rev K Page 75
20. Instructions For Use: 2367-02 Quick Cuff
For Use With
The MAXAIR 2367-02 Quick Cuff is a component of the
MAXAIR Hood Systems used with the 2076-03 and 2026-03 Helmets.
MAXAIR 2367-02 Quick
Front View Inside View
Materials
Cuff is polypropylene/polypropylene spunbonded & latex free elastic
Specications
Temperature Limits: 49
0
C
Regulatory
NOTE
The Quick Cuff is used alternately with the
2076-03 and the 2026-03 Helmets.
O.N. 2367-02
PN 07631022
WARNING
Use only if package is received unopened and contents are
undamaged. If damage is noted, contact the shipper for replacement
or repair.
Prior to using any MAXAIR
®
System or component, be sure to be
familiar with the system’s NIOSH approved conguration.
DO NOT use if any component is damaged. If any components are
damaged or contaminated and therefore unt for safe and effective
use, they should be replaced immediately.
Only trained and experienced personnel who have read and under-
stand the User’s Instructions should use this product.
Failure to follow the User’s Instructions, these and in the MAXAIR
Systems User’s Instructions, P/N 03521015, may be hazardous to
the user’s health.
The institution using this product in any application is responsible for
determining the appropriateness of this equipment relative to regula-
tory requirements. Bio-Medical Devices Intl, Inc. does not recom-
mend the appropriate systems for a particular institution or facility.
Use only MAXAIR Systems/ NIOSH approved compatible
components.
NOT for use in atmospheres immediately dangerous to life or health
(IDLH), and atmospheres containing less than 19.5% oxygen, or
more than 25% oxygen.
Flammability Level I: fabric may burn if exposed to open ame.
Follow current local regulations governing biohazard waste to safely
dispose of used shrouds.
If you need more information, contact your BMDI Sales
Representative, or call BMDI customer service at 1-800-443-3842.
!
Symbol Denitions
Warning, Caution, or Note
Order Number Part Number
!
O.N. PN
!
2076-03 Helmet 2026-03 Helmet