Page 74 P/N 03521015 Rev K
19.Continue pulling Hood inside-out up
and over Hood and HLF to ensure
contaminated outside is folded up
inside.
20. Continue pulling Hood off front
of Helmet releasing the Lens
from its Helmet attachment
points.
17. Untie both Neck and Body Ties.
Either retie Neck ties very loosely or
cut them off Hood to ensure Neck Ties
do not contaminate Helmet, gown, or
wearer.
Doff:
21. Discard Hood and HLF
per institutional protocol for
contaminated waste.
18.Grasp both Body Ties and pull up
to bring back bottom of Hood up
and over Helmet.
23. Doff and discard gown
per gown supplier
protocol.
26. Disconnect the Helmet
Power Cord from the Battery
- push the Secure Connec-
tion Button down, pull Cord
Connector out, release the
Button.
25. Lift Helmet up and off Head24. Loosen Headband by
turning Ratchet Know fully
counterclockwise.
To Next Page
Loading...