EasyManua.ls Logo

MAXA i-32V5C MIDI 0121 - Advanced Menus: Parameters, Firmware, and USB Updates

MAXA i-32V5C MIDI 0121
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Model i-32V5C Midi 
 63

accessory allowing connecon of the unit to external controllers via serial cable with RS-485 electrical standard and ModBus RTU protocol.
USB RS485 serial converter (ISK)
Interface device capable of reading and wring control registers via the RS485 standard and converng it to a USB port that can be connected
to any supervisory system.

device that allows conversion between Modbus RTU and BACnet/Lonworks, allowing the unit control to be congured as a normal device in the
BACnet/Lonworks network.

device that allows conversion between Modbus RTU and BACnet/ Konnex, allowing the unit control to be congured as a normal device in the
BACnet / Konnex network.
7-touch/HUB (Cloud/App)
7-touch/HUB (Cloud/App) is a compact system consisng of an ultra-thin touch panel, including a temperature control unit and gateway for
remote control from a PC (via the "my.maxa.it" portal) or smartphone (via the app downloadable from the "My Maxa" online store). It allows
winter and summer climate control.
Remote touch screen display (Hi-TV415)
remote touch screen control for the centralised management of a chiller/heat pump network, it integrates humidity and
temperature sensors for the thermo-hygrometric analysis of the environment and the management of the double set point
for radiant oor systems that use a dehumidicaon system.
Remote control (I-Cr)
Modbus remote control with negave LCD and capacive keys. The device is to be used as a remote machine keyboard with
local temperature detecon, replicang the funcons of the on-board control.
3. INSTALLATION
All handling, installaon and maintenance operaons must be carried out by QUALIFIED PERSONNEL only. Before any operaon on the unit,
make sure that the power supply is disconnected.
The minimum permissible temperature for storing the units is 5°C.
UNIT DIMENSIONS,HYDRAULIC CONNECTIONS,WEIGHTS AND CENTRE OF GRAVITY PO
SITION

Model i-32V5C Midi   
0121 1600 680 1315
0126 1600 680 1315
0128 1600 680 1315
0132 1600 680 1315
   
0121 1660 700 
0126 1660 700 
0128 1660 700 
0132 1660 700 

Table of Contents

Other manuals for MAXA i-32V5C MIDI 0121

Related product manuals