i-HP Industrial inverter air/water heat pumps with axial fans
23
13 TECHNICAL DATA
13.1 STANDARD VERSION
Operating conditions:
(1) Cooling: Outdoor air temperature 35°C; inlet/outlet temperature 23/18°C.
(2)
Cooling: Outdoor air temperature 35°C; inlet/outlet temperature 12/7°C.
(3)
Heating: Outdoor air temperature 7°C DB 6°C WB; inlet/outlet temperature 30/35°C.
(4) Heating: Outdoor air temperature 7°C DB 6°C WB; inlet/outlet temperature 40/45°C.
(5) Cooling: water temperature inlet/outlet 12/7°C.
(6) Heating: normal climatic condition; Tbiv=-7°C; eater temperature inlet/outlet 30/35°C.
(7) Calculated in the case of the plant water temperature decreased by 15°C for 6 minutes of defrosting.
(8) Condition (3); the value is determined on the basis of measurements taken in accordance with the UNI EN ISO 9614-2, in compliance with the requirements of
Eurovent certification.
(9) Sound pressure level measured at 1m from the unit, in free field, according to ISO 3744. Also the values with installed accessories SL or SSL are reported.
(10) Packing height including the pallet
(*) With Hz max operation, this function can be activated by the user.
N.B. The performance data are indicative and could be subject to change. In addition, the performances declared in apex (1), (2), (3) and (4) refer to the
instantaneous power according to EN 14511. The declared data stated in the apex (6) is determined according to the UNI EN 14825.
WARNING: The minimum temperature allowed for storing the unit is 5°C.
TECHNICAL CHARACTERISTICS
0125
Integrated
circulator
0135 / 0235
Integrated
circulator
0250
Integrated
circulator
Energetic class
Water temp. 35°C / 55°C
Refrigerant oil (type, quantity)
Design pressure (high/low)
Available head pressure (2)
Pump rated power input (2)
Minimum volume of water (7)
Energy Efficiency Index (EEI)
70,1 / SL 68,3 / SSL 67,4
73,6 / SL 71,8 / SSL 70,9
76,5 / SL 74,5 / SSL 73,6
54,4 / SL 52,4 / SSL 50,7
56,5 / SL 54,7 / SSL 53,0
59,7 / SL 58,7 / SSL 56,5
Packing dimensions (L×H×W) (10)