2.3 Push the TEMP button to cancel the TIMER ON setting. The digital area will show "00".
2.4 Push the TIMER button and the remote controller will show the last set time for the STOP operation and the signal "h"
will be shown on the display panel. You are now ready to reset the time of the STOP operation.
2.5 Push the TEMP button (▲ or ▼) to set the time you want to stop the operation.
2.6 After setting the TIMER there will be a one-half second delay before the remote controller transmits the signals to the Air
Conditioner. Then after approximately another 2 seconds, the set temperature will re-appear on the digital display.
3. Set the STARTING & STOPPING time
3.1 Please press the CANCEL button to cancel any former settings.
3.2 Push the TIMER button and the remote controller will show the last set time for START operation and the signal "h" will
be shown on the display panel. You are now ready to readjust the TIMER ON to start the operation.
3.3 Push the TEMP button (▲ or ▼) to set the time you want to start the operation.
3.4 Push the TIMER button and the remote controller will show the last set time for STOP operation and the signal "h" will
be shown on the display panel. You are now ready to reset the time of the STOP operation.
3.5 Push the TEMP button (▲ or ▼) to set the time you want to stop the operation.
3.6 After setting the TIMER there will be a one-half second delay before the remote controller transmits the signal to the Air
Conditioner. Then, after approximately another 2 seconds, the set temperature will re-appear on the digital display.
NOTE
1. Please reset the TIMER after cancelling the former time settings.
2. The setting time is relative time. That is the time set is based on the delay of the current time.
WARNING
1. Be sure there are no barriers between the remote controller and the receiver of indoor unit otherwise the air conditioner
will not work.
2. Keep the Remote Controller away from all liquids.
3. Protect the Remote Controller from high temperatures and exposure to radiation.
4. Keep the indoor receiver out of direct sunlight or the Air Conditioner may malfunction.
5. Keep controller away from EMI (Electro-Magnetic Interference) supplied by other household appliances.
27
To Next Page
Loading...
