IMPORTANT INFORMATION
1-3
2. Humidity
Relative humidity above 90% may cause the machines electronics or motors to malfunction
or may trip the ground fault interrupter. Corrosion problems may occur on some metal components.
If the relative humidity is below 30% belts and rubber hoses may eventually develop dry rot. This
condition can result in hose leaks, which may cause hazards external to the machine in conjunction
with adjacent electrical equipment.
3. Ventilation
The need for make – up air openings for such laundry room accessories as dryers, ironers,
water heaters, etc. must be evaluated periodically. Louvers, screens, or other separating devices
may reduce the available air opening significantly.
4. Radio Frequency Emissions
A filter is available for machines in installations where floor space is shared with equipment
sensitive to radio frequency emissions. All machined that are shipped to CE countries are equipped
with this filter and comply with the EMI regulations.
5. Elevation
If the machine is to be operated at elevations over 3280 feet (100 meter) above sea level, pay
special attention to water levels and electronic settings (particularly temperature) or desired result
may not be achieved.
6. Chemicals
Keep stainless steel surfaces free of chemical residues to avoid corrosion.
7. Water damage
Do not spray the machine with water. Short circuiting and serious damage may result.
Repair immediately all seepage due to faulty gaskets, etc.
Replace all panels that are removed to perform service to perform service and
maintenance procedures. Do not
operate the machine with missing guards or
with broken or missing parts. Do not bypass any safety devices.
1.6 MACHINE LOCATION
1. Foundation
The concrete floor must be of sufficient strength and thickness to handle the floor loads
generated by the machine at high extract speeds.
2. Service / Maintenance Space
Provide sufficient space to allow comfortable performance of service procedures and routine
maintenance. This is especially important in connection with machine equipped with AC inverter
driver. Consult installation instructions for specific details.
To Next Page
Loading...