Maxon TE-33 - Step 3 - Attach Optional Battery Box & Frame to Vehicle (if Equipped)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
28
STEP 3 - ATTACH OPTIONAL BATTERY BOX & FRAME
TO VEHICLE (IF EQUIPPED)
1. Liftgate and optional
battery box are typically
installed on trucks as
shown in FIG. 28-1. See
the following page for
battery and cable con-
nections.
LIFTGATE
LIFTGATE
POWER UNIT
RECOMMENDED LIFTGATE & BATTERY BOX
INSTALLATION ON TRUCK
FIG. 28-1
CIRCUIT
BREAKER
RECOMMENDED CONFIGURATION
NOTE: Make sure the Liftgate power unit, and all batteries on the vehicle for the
power unit, are connected correctly to a common chassis ground.
175 AMP
FUSED CABLE
TRUCK BATTERIES,
TYPICAL LOCATION
150 AMP
CIRCUIT BREAKER
OPTIONAL
BATTERY BOX,
TYPICAL LOCATION