Maxon TE-33 - Page 50

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
50
8. Ensure top surface of platform
and extension plate are fl ush
at the RH & LH sides of plat-
form (FIGS. 50-1 and 50-2).
The allowable difference in
height is 1/8” maximum as
shown.
SURFACES FLUSH
1/8” (MAX)
1/8” (MAX)
SURFACES FLUSH
EXTENSION
PLATE
EXTENSION
PLATE
PLATFORM
PLATFORM
DIFFERENCE IN HEIGHT FOR TOP OF PLATFORM
& EXTENSION PLATE (RH VIEW)
FIG. 50-1
DIFFERENCE IN HEIGHT FOR TOP OF PLATFORM
& EXTENSION PLATE (LH VIEW)
FIG. 50-2
NOTE: Correct any fi t and in-
terference problems
before continuing
with installation.
STEP 10 - REMOVE LOCKING BRACKETS & CHECK
FOR INTERFERENCE - Continued