11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
49
7. Raise platform to bed height (FIG. 49-1). Check for 5/8”
(+/- 1/8”) gap between heel of platform and edge of ex-
tension plate (FIG. 49-1).
5/8”
(+/- 1/8”)
PLATFORM
EXTENSION
PLATE
NOTE: Correct any fi t and interference problems before continuing with installation.
CHECKING GAP BETWEEN PLATFORM
& EXTENSION PLATE
FIG. 49-1
STEP 10 - REMOVE LOCKING BRACKETS & CHECK
FOR INTERFERENCE - Continued
5/8”
(+/- 1/8”)
To Next Page
Loading...
