XStream™OEMRFModule–ProductManualv5.x00[2006.02.24]
©2006MaxStream,Inc.ConfidentialandProprietary 52
Appendix ntGuideB:Developme
XStream OEM Development Kit Contents
Th e hardware and software needed for a robust wireless link: e Development Kit includes all th
TableB‐01. XStreamDevelopmentKitContents
Item Qty. Description Part Number
Quick Start Guide 1 Familiarizes users with some of the module’s most important functions. MD0016
CD 1 Contains documentation, software and tools needed for RF operation. MD0030
XStream OEM RF Module Long Range OEM RF Module w/ Connector 1 RPSMA varies
XStream OEM RF Module Long Range OEM RF Module w/ d wire antenna 1 attache varies
MaxStream Interface B Enables communication t 22 devices B-R oard 2 o RS-232/485/4 XI
Antenna 1 900 MHz RPSMA, 6" Ha rticulating lf-Wave, dipole, a A09-HASM-675
Serial Loopback Adapt
Co the female RS-232 (DB-9) serial connector of the
Ma Interface Bo o configure the modul
fun repeater (fo
er 1
nnects to
xStream
ard and can be used t e to JD2D3-CDL-A
ction as a r range testing)
NULL Modem Adapt
o-male)
Co the female RS-232 (DB-9) serial connector of the
Ma Interface Board and can be used to connect the module t
an (female DB
er
1
(male-t
nnects to
xStream
o JD2D2-CDN-A
other DCE 9) device
NULL Modem Adapter
1 Used to bypass radios to verify serial cabling is functioning properly JD3D3-CDN-A
(female-to-female)
Male DB-9 to
RJ-45 Adapter
1
Facilitates adapting the DB-9 Connector of the MaxStream Interface
Board to a CAT5 cable (male DB9 to female RJ45)
JE1D2-CDA-A
Female DB-9 to
1
Facilitates adapting the
RJ-45 Adapter
DB-9 Connector of the MaxStream Interface
Board to a CAT5 cable (female DB9 to female RJ45)
JE1D3-CDA-A
Power Adapter 2 Allows Interface Board to be powered by a 110 Volt AC power supply JP4P2-9V10-6F
RS-232 Cable (6’) 2 Connects interface board to devices having an RS-232 serial port JD2D3-CDS-6F
Interfacing Hardware
MaxStream developed proprietary interface boards to facilitate the connection between XStream
les and serial devices. MaxStream has developed an interface board that supports
e RS-232/485/422 protocols (MaxStream part number: XIB-R).
he following section illustrates properties of the MaxStream XIB-R Interface Board. The
axStream Interface board provides means for connecting the XStream Module to any node that
has an available RS-232 or RS-485/422 connection. Since the module requires signals to enter at
CMOS voltages, one of the main functions of the interface board is to convert signals between
CMOS and RS-232 levels.
OEM RF Modu
th
T
M
Downloaded from Elcodis.com electronic components distributor
To Next Page
Loading...
Need help?
General
