Maynuo Electronic M9712 - 4.9 Remote Operation

38
CV 2
CW 3
CR 4
CC Soft Start 20
Dynamic Mode 25
Short Circuit Mode 26
List Mode 27
CC Loading And Unloading Mode
30
CV Loading And Unloading Mode
31
CW Loading And Unloading
Mode
32
CR Loading And Unloading Mode
33
CC Mode Switch To CV Mode 34
CR Mode Switch To CV Mode 36
Battery Test Mode 38
CV Soft Start 39
Changin System Parameters 41
Input ON 42
Input OFF 43
4.8.9 Common Operational Function Descriptions
Table 1. Remote Control Operation：
Operation Register Value Description
Force Single Coil PC1 1 mandatory
Table 2. Cancelling remote control operation:
Operation Register Value Description
Force Single Coil PC1 0 mandatory
Table 3. Local control override operation:
Operation
Register Value Description
Force Single Coil PC2 1 mandatory
Table 4. Local control allows the operator to:
Operation Register Value Description
Force Single Coil PC2 0 mandatory
Table 5. Input ON operation:
Operation Register Value Description
Preset
Multi-Registers
CMD 42 mandatory
Table 6. Input OFF operation:
Operation Register Value Description
Preset
Multi-Registers
CMD 43 mandatory
株式会社ロイノス