EasyManua.ls Logo

Maytag MXR65 - Chemical Dispenser Service

Maytag MXR65
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-18
1. To access and service the chemical
dispenser, lift the cover of the dispenser.
2. The bottom side of the cover is marked 1,
2, 3 and a flower symbol for prewash, main
wash, bleach and fabric softener
3. The two right chemical dispenser cups have
siphon covers that can be removed for
cleaning. Use a small flat blade screwdriver
to pry the top corner of siphon away from
the edge and lift the siphon off the tube.
NOTE: These siphons need to be cleaned
frequently to avoid build up of chemicals.
Clean up inside the tube and all around the
chemical dispenser cup.
4. A dispenser block-off cover can be installed
to prevent access to the pre-wash or bleach
dispensers. Insert the block-off cover into
the desired dispenser and push down until
the tabs on the front and back of the cover
click into position.
5. To remove a block-off cover, use a small flat
blade screwdriver to pry under the corner
of the cover and release the clips from the
dispenser.
CHEMICAL DISPENSER

Table of Contents

Other manuals for Maytag MXR65

Related product manuals