Mazda 2014 3 - Instrument Cluster (Type B)

37
TACHOMETER
Instrument Cluster (Type B)
Traction Control System (TCS)/
Dynamic Stability Control (DSC)
On: TCS/DSC malfunction
Flashing: TCS/DSC operating
BSM
OFF
BSM OFF (Blind Spot
Monitoring)
(p. 21)
OFF
Dynamic Stability Control
(DSC) Off Indicator Light
SPORT Mode On (p. 39)
Lights On (Exterior)
High Beam Control On
Headlight High Beams On
Air Bag/Front Seat Belt
Pretensioner System
Malfunction
Check Engine Light
Seat Belt Unbuckled/
Malfunction
Turn Signals/Hazard
Warning Indicator Lights
Tire Pressure Monitoring System
(TPMS) Warning Light
(p.7)
On/WarningBeep:Lowtirepressureinone
or more tires. Flashing: TPMS Malfunction
Cruise Main Indicator Light
On (AMBER)/Cruise Set
Indicator Light On (GREEN)
ABS (Antilock Brake
System) Malfunction
Shift Position Indicator Light
Security Indicator Light
Brake Warning Light
Parking brake on/low brake
uid/malfunction
Master Warning Light
Low Fuel Level
TPMS NOTE: Low ambient temperature and/or high altitude may cause tire pressures to
changeandturntheTPMSwarninglighton.Ifthewarninglightcomeson,seep.7.
NOTE: See Owner’s Manual for more
details and explanations.
OUTSIDE
TEMPERATURE DISPLAY
The outside temperature unit can
be switched between °C and °F
using the following procedure
Without Infotainment:
1 Push the INFO button with
the ignition OFF and continue
pressing the INFO button for 5
seconds or longer after switching
the ignition ON. The outside
temperature display ashes.
2 Push the up or down part of
the INFO switch to change the
temperature unit.
3 Push and hold the INFO button
for 3 seconds or longer until it
stops ashing.
With Infotainment:
1 GotoSystemSettings.
1518135_14d_Mazda3_SSG_070313.indd 37 7/3/13 3:14 PM