18 | PRM-7000 / 8000 / 9000 Users Guide
Power Management Settings
Power Setting
Time of Inactivity Until:
(Set in Settings) LCD Off Backlight Off
Lowest 60 Seconds 15 Seconds
Medium 10 Minutes 45 Seconds
High Always On Always On
Low Battery
Condition
30 Seconds 2 Seconds
NOTE: If the LCD is turned off, the PRM Instrument will continue
to monitor and measure radiation including current, average,
maximum, minimum and total-count values Pressing any key
will “wake-up” the display and operations continue normally
until the inactivity threshold of the selected Power Setting is
exceeded.
8.9 Low AvWin
This setting allows the user to specify the time in seconds (or window) over which low-
level measurements are averaged in the Current Measurement displayed of the Home
Screen. This capability allows the user to shorten the window so that measurement
response time can be increased. Increased response time is useful for effi ciently locating
specifi c sources of radioactive activity.
Once at this setting, the current averaging window will be displayed in seconds. Press
to change. Choices are 5, 10 and 20 seconds. The factory default is 20 seconds.
To Next Page
Loading...
Need help?
General