MBM 508A - Relocation or Disposal; Relocation; Removal of the Machine from Its Present Location; Transport

48
8. Relocation or Disposal
8-1 : Relocation
8-1-1 : Removal of the machine from its present location
▪ Turn off the power switch.
▪ Remove the power plug from the wall outlet.
▪ Lower the auxiliary table.
▪ Raise the paper ejection table and put it on the paper feed table, and hang it on the pin.
8-1-2 : Transport
▪ Transport the removed parts, attachments and Operation Manual together with the machine.
▪ Do not to expose the machine to strong vibration or shock.
▪ Ensure that the machine is carried by two persons wearing protective gloves, holding the four corners of
the machine base firmly
.
8-1-3 : Installation
When installing the machine at its new location, observe the same procedure as when first installing it. (Refer to
“4. Preparation.”)
8-2 : Disposal
When disposing of the machine, ask a contractor specialized in industrial waste disposal to handle it in accordance
with the local regulations.