30
Cleaning the Air Filters Grills & Radiator
If the machine is running, reduce to minimum revs and allow engine to run for a further minute
before switching off – remove and pocket the ignition key.
Clean outsides of air suction grills before releasing the three rubber hooks and opening the
cover. Clean the radiator matrix, inside of the air intake grill and surrounding area using a
compressed air line, do not use any tools to clean the radiator that may cause damage to the
fins. Close the cover and secure in place with the rubber hooks.
Clean air intake grills of the machines front cover to ensure maximum airflow to the engine.
Ensure covers are closed and secured correctly to stop dirt getting in.
WARNING!
If the engine temperature becomes too high a red temperature warning light on the ignition panel
will be illuminated to notify the operator – where this occurs refer to the engine manufacturer’s
manual.
To Next Page
Loading...
