r
A
..
DANGER
NEVERSTOREYOUR CHIPPER-SHREDDER INDOORS
OR IN AN ENCLOSED,
POORLY VENTffATED AREA
IF GASOLfNE R~lNS IN
THE TANK. FUMES MAY
REACH AN
OPEN FLAM~ SPARK OR PILOT UGHT
FROM A FURNAC~ WATER HEATER, CLOTHES
DRYER, CIGAR- ETC.
“o prevent &gine damage ifchfpper-shr&fder is not used for
norethan30 days, followthe steps tx+ow:
. .
/OT12
GASOLINE MUST BE REMOVED OR TREATED TO
‘REVENT GUM bEPOSfTS FROM FORMING IN-THE TANK,
W~R, HOSE AND CARBURETOR DURING ..STORAGE.
d-SODURING STORAGE, ALCOHOL-BLENDED GASOLINE
liAT USES. ETHANOL OR METHANOL (SOMETIMES
XLED GASOHOL) AITRACTS WA~R. IT ACTS ON THE
M.SOLfNE,TO FORM ACIDS WHICH” DAMAGE WE EN-
ilNE
.“
,.. .
To remove gasoline, run engine unt~ tank is empty and engine
sfops. If you do not Want to remove gasoline, a gas stabilize
such =“ STA-BIL may be added to any gasoline left in the tank
to minimize gum deposits and acids. If the tank is almost empty
mix stabilizer with fresh gasoline in a separate container and adc
some to ttje tank. Atways
follow instructions on stabllizel
container. Then run enghe at least 10 minutes after stabl.
Ilzer Is added to allow ‘mixture to reach carburetor. Store
chipper-shredder In safe place. See warning above.
The following steps shbukt be taken to prepare your shredderfol
storage.
@ Clean unit thoroughly, including engine.
. Refer to engine manual for correct engine storag~
instruct”~ns. “
. Carefully inspe~ unit and repla~ any worn, damaged, 01
missing parts and tghten any loose fasteners
● If storing in an unventilated or metal storage shed, coal
metal par& with a ~ght oil or siliine to prevent rusting.
. Store Chipper/Shredder in a dry,” clean area out of the
reach of children.
.
437
To Next Page
Loading...
