Introduction
Thank you for purchasing this
McElroy product
The McElroy TracStar
®
No.28/No.412/No.618 self-
contained, self-propelled, all terrain fusion machine,
and is designed to produce consistently high quality
polyolefin pipe butt fusion joints with a minimum of
operator effort.
The TracStar
®
No.28 model fuses 2” IPS (63mm)
minimum to 8” DIPS (225mm) maximum pipe.
The TracStar
®
No.412 model fuses 4” IPS (110mm)
minimum to 12” DIPS (340mm) maximum pipe.
The TracStar
®
No.618 model fuses 6” IPS (180mm)
minimum to 18”IPS (450mm) maximum pipe.
With reasonable care and maintenance, this machine
will give years of exemplary service.
Before operating this machine, please read this manual
thoroughly, and keep a copy with the machine for future
reference. This manual is to be considered part of your
machine.
Always return the manual to the literature compartment.
World Class Training
This manual is intended as a guide only and does not
take the place of proper training by qualified instructors.
The information in this manual is not all inclusive and
can not encompass all possible situations that can be
encountered during various operations.
McElroy Manufacturing, Inc., offers advanced training
classes to enhance efficiency, productivity, safety and
quality. Training is available at our facility or on-site at
your location. Call (918) 836-8611.
PH00917-
8-15-97
TX01315-4-7-97
TX01853-9-27-00
PH01894-9-27-00
Patent No’s. 5,814,182 6,212,748 6,212,747 6,021,832
(other patents pending)
To Next Page
Loading...
