7 - 6
Maintenance
Facer Blades
Blades bolt directly to the blade holder and should be inspected
for damage and sharpness.
Dull or chipped blades must be replaced.
TX00439-9-13-94
Fasteners Must Be Tight
Check all nuts, bolts, and snap rings to make certain they are
secure and in place.
TX00437-9-13-94
Clean the Clamping Chains
On the combination unit clean the side fusion chains as needed.
Clean using a stiff-bristled brush and oil generously. Wipe away
any excess oil.
TX00436-9-13-94
PH00378-9-14-94
PH00433-11-1-94
PH01912-11-15-00
Check/Add Antifreeze
Add antifreeze in a 50/50 mix with water as needed on diesel
units.
Replace antifreeze mixture once each year or as recommended in
engine manual.
TX01897-11-15-00
PH01903-11-15-00
To Next Page
Loading...