McIntyre 320 - Default Chapter; Table of Contents

320/407/500/600.41912-ENG
Contents
1. Introduction 1
2. Warnings 2
2.1. Operating Warnings 2
2.2. Warning Labels 4
2.2.1. Positioning of Labels 7
2.3. Important Information 8
2.3.1. Serial Number Plate 8
2.3.2. Electric Motor Rotation 8
2.3.3. Continual Improvement Policy 9
2.4. A Cautionary Tale 9
3. Installation 10
3.1. Lifting & Transporting 10
3.2. Siting & Installation 10
3.2.1. Electrical Power Supply 11
3.3. Hydraulic Fluid 11
3.4. Dimension&TechnicalSpecication 12
3.4.1. 320 Shear 12
3.4.2. 407i & 407CAT Shear 13
3.4.3. 500 LGT and 500 CATCutting Capacity (Mild Steel 43A): 14
3.4.4. 600 LGT and 600 CATCutting Capacity (Mild Steel 43A): 15
4. Operation of the Shear 16
4.1. Starting & Stopping the Shear 16
4.1.1. Start & Stop Buttons 16
4.1.2. Use of the Electrical Isolator Switch 16
4.1.3. The Emergency Stop (E-Stop) Button 17
4.2. Foot Pedal Control 17
4.2.1. Using the Foot Pedal 17
4.2.2. Siting the Foot Pedal 17
4.3. Starting & Stopping the diesel powered 407 Shear 18
4.3.1. To Start the Shear 18
4.3.2. To Stop the Shear 19
4.3.3. The Emergency Stop (E-Stop) Button 19
4.4. Adjusting the Stroke 20
4.5. The Blade Guard 21
4.6. Protective Clothing 21
4.7. Shearing Large Items 22
4.8. Shearing Small Items 22
4.9. Using the CAT Bracket & V-Block 23
5. Periodic, Routine Care & Maintenance 24
5.1. Warnings 24
5.2. Hydraulic Fluid 24
5.2.1. Storage, Handling & Disposal 24
5.2.2. First Aid Measures 24