1
320/407/500/600.41912-ENG
1. Introduction
This Manual covers the operation and maintenance of the single and three phase versions
of the 320, 407, 500, and 600 Shears, including the CAT versions and diesel powered
version of the 407 Shear.
McIntyre machines are designed to give long and trouble-free life, provided that simple
maintenance procedures are carried out as described in this Manual. It is recommended
that you take out a service contract with the supplier to ensure the Shear is kept in best
working order.
Remember that scrap metal processing can be hazardous. Before operating the
equipment, it is important that you read and understand the safety instructions contained
in this Manual. Please ensure that your Operators are fully trained in the use of the
Shear and, should you decide against a service contract, that you conduct periodic safety
reviews of the equipment’s safety features and Warning Labels. Replacement Warning
Labels and other items of safety equipment such as the Blade Guard, Foot Pedal and
Tongs can be obtained at cost from the Manufacturer. If you would like more safety or
operating information for this type of scrap metal processing equipment, then this can be
obtained by contacting any one of the organisations listed at the end of this Manual.
If you need any further help or assistance, or wish to order parts or a service contract,
please contact your local agent or the manufacturer:
JMC Recycling Systems Ltd
Unit 2, Harrimans Lane, Dunkirk, Nottingham, England NG7 2SD
Tel: UK +44 (0) 115 940 9630 Fax: UK +44 (0) 115 979 1478
www.jmcrecycling.com email: info@jmcrecycling.com
To Next Page
Loading...
