McIntyre 320 - Operator Training Record

56
320/407/500/600.41912-ENG
Operator Training Record
This Operation and Maintenance Manual must be read before operating the equipment.
• It is the owner’s responsibility to ensure that all Operators are fully trained in the
use of this equipment, and that each individual Operator has access to this Manual.
• All Operators should be fully trained in safe working practices, and be fully familiar
with the safety features of this equipment, which include the Foot Pedal, Blade
Guard, Instruction and Warning Labels.
• No unauthorised persons should operate this machine. No persons under the age
of 18 should operate this machine.
For your protection, and for the safety of the Operators, we have included the following
record:
I have read this Operation and Maintenance Manual and I am fully familiar with the safety
features on this equipment. I understand that scrap metal processing can be hazardous
and the importance of correct working practices:
Machine Owner: Signature Date
1st Operator Signature Date
2nd Operator Signature Date
3rd Operator Signature Date
4th Operator Signature Date
5th Operator Signature Date
6th Operator Signature Date
7th Operator Signature Date
8th Operator Signature Date
9th Operator Signature Date
10th Operator Signature Date
11th Operator Signature Date
12th Operator Signature Date
13th Operator Signature Date
14th Operator Signature Date
15th Operator Signature Date
16th Operator Signature Date
17th Operator Signature Date
18th Operator Signature Date
Attach additional sheets for subsequent Operators if necessary