55
320/407/500/600.41912-ENG
9.2. End of Life Disposal
ContactJMCRecyclingSystemLtdrst.Wecanusuallyrefurbishthemachineryormay
accept the machine as part exchange against newer models.
If the Shear is to be scrapped then:
• Ensure that the equipment is disconnected from the mains supply.
• Dispose of Hydraulic Oil responsibly, at a local authority facility or recycler.
• All electrical and electronic components should be disposed of in accordance with
the WEEE directive 2002/96/EC or returned to the manufacturer.
• Use appropriate lifting equipment and wear protective clothing throughout the
dismantling process.
• Take particular care when removing the Hydraulic Ram, Top Jaw and Blade Guard.
Use a chock to prevent the Jaw rotating under its own weight. Stand well clear
while lifting.
Always chock the Top Jaw to stop movement.
Do not use any heat source to cut open the Hydraulic Tank
9.3. Training, Safety & Ownership Records
The following pages are provided for photocopying as required.
• Operator Training Record
• Shear Safety Checklist
• Ownership Registration Form
To Next Page
Loading...