Section 6 : Spill or Leak Procedures
Steps to be taken in case material is released or spilled: Contain material to
prevent contamination of soil, surface water and ground water. May be slipping
hazard.
Section 7 : Handling and Storage
Store at temperatures and conditions as indicated on the product label. Store in
original container and keep vial closed.
Section 8 : Personal Protection
Ventilation: Use general room ventilation.
Respiratory Equipment: None.
Protective Gloves: None
Eye Protection: None
Other Protective Equipment/Clothing: None
Section 9 : Physical Data
Appearance and odor: Vial - Vial with desiccant liner, Test Strips - Plastic
strip with reaction area.
pH: N/A
Specific Gravity: N/A
Boiling Point: N/A
Melting Point: N/A
Vapor Pressure: N/A
Evaporation Rate: N/A
Solubility in Water: N/A
Section 10 : Reactivity Data
Stability: Stable if at storage temperature and original vial closed.
Conditions to Avoid: Product can oxidize and decompose at elevated
temperatures. Avoid putting water inside of vial, exothermic reaction will occur.
Temperatures above 300°F may cause product degradation and self combustion.
Substances to Avoid: Avoid contact with strong acids and oxidizing materials.
Hazardous Decomposition Products: Flammable hydrocarbons.
Hazardous Polymerization: Will not occur.
TRUEresult
®
Quality Assurance / Quality Control Manual
13
To Next Page
Loading...
