McNeilus XC Rear Loader - Pneumatic System; Coalescing Filter; Mechanical System; Refuse Vehicle Body and Components

© 2008 McNeilus Truck and Manufacturing, Inc.
Rear Loader
89
Preventive Maintenance
3.3 Pneumatic System
SAFETY NOTICE
Perform your company’s Lockout/Tagout
procedure. If your company does not have a
Lockout/Tagout procedure, follow OSHA
1910.147 and 1910.146 Confined Space as
appropriate.
3.3.1 Coalescing Filter
• Daily Checks - The coalescing lter is drained by the
operator or skilled service personnel.
Locate the drain tting (Figure 45, Item 1) on the bottom of the
coalescing lter.
F
L
O
W
1
Figure 45
Drain the lter by turning the drain tting counterclockwise.
Turn the drain tting clockwise after all moisture and
contaminants have drained from the canister.
3.4 Mechanical System
SAFETY NOTICE
Perform your company’s Lockout/Tagout
procedure. If your company does not have a
Lockout/Tagout procedure, follow OSHA
1910.147 and 1910.146 Confined Space as
appropriate.
3.4.1 Refuse Vehicle Body and Components
• Daily Checks - The body and components are inspected
by the operator or skilled service personnel.
Inspect the body and all components for binding, damage,
loose, or missing parts.